Child figure
child-figure
dresses asset:person-child
— and nothing else. Appearance is invisible to the drawing set, so adding this changes no
plan, no section and no elevation.
- 12of 500 meshes
- 1slot
- 1finish
Drag to orbit · scroll to zoom
$soft
This definition leaves
$soft
open, and a look line fills them. Every combination is one body — same
geometry, same selector, same sheets — so the block below rewrites itself as you pick.
Only materials are slottable: a size would have to agree with the plan, so it stays on
the entity.
Paste this
Every part: the 1 materialdef the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.
{"t":"materialdef","id":"pal-felt","of":"cloth","value":58}
{"t":"lookdef","id":"child-figure","for":"asset:person-child","desc":"Small standing child figure with simplified rounded proportions.","slots":{"soft":"pal-felt"},"preview":{"projection":"perspective","azimuth":40,"elevation":10,"fov":30,"margin":1.02},"body":{"type":"Group","children":[{"type":"Mesh","material":"$soft","geometry":{"type":"CapsuleGeometry","radius":0.12,"height":0.25,"capSegments":10,"radialSegments":16},"position":[0,0.72,0],"scale":[1.05,1,0.76]},{"type":"Mesh","material":"$soft","geometry":{"type":"RoundedBoxGeometry","width":0.23,"height":0.14,"depth":0.16,"radius":0.065,"segments":4},"position":[0,0.49,0]},{"type":"Mesh","material":"$soft","geometry":{"type":"CylinderGeometry","radiusTop":0.042,"radiusBottom":0.052,"height":0.07,"radialSegments":16},"position":[0,0.96,0]},{"type":"Mesh","material":"$soft","geometry":{"type":"SphereGeometry","radius":1,"widthSegments":18,"heightSegments":12},"position":[0,1.045,0],"scale":[0.095,0.12,0.095]},{"type":"Mesh","material":"$soft","geometry":{"type":"TubeGeometry","path":[[-0.07,0.49,0],[-0.08,0.28,0.015],[-0.1,0.09,0.05]],"radius":0.046,"radialSegments":12,"tubularSegments":18}},{"type":"Mesh","material":"$soft","geometry":{"type":"TubeGeometry","path":[[0.07,0.49,0],[0.08,0.28,0.015],[0.1,0.09,0.05]],"radius":0.046,"radialSegments":12,"tubularSegments":18}},{"type":"Mesh","material":"$soft","geometry":{"type":"RoundedBoxGeometry","width":0.11,"height":0.07,"depth":0.18,"radius":0.035,"segments":4},"position":[-0.095,0.035,0.07]},{"type":"Mesh","material":"$soft","geometry":{"type":"RoundedBoxGeometry","width":0.11,"height":0.07,"depth":0.18,"radius":0.035,"segments":4},"position":[0.095,0.035,0.07]},{"type":"Mesh","material":"$soft","geometry":{"type":"TubeGeometry","path":[[-0.13,0.84,0],[-0.19,0.68,0.035],[-0.19,0.53,0.065]],"radius":0.04,"radialSegments":12,"tubularSegments":18}},{"type":"Mesh","material":"$soft","geometry":{"type":"TubeGeometry","path":[[0.13,0.84,0],[0.18,0.68,-0.01],[0.17,0.53,0.045]],"radius":0.04,"radialSegments":12,"tubularSegments":18}},{"type":"Mesh","material":"$soft","geometry":{"type":"SphereGeometry","radius":0.045,"widthSegments":16,"heightSegments":10},"position":[-0.18,0.52,0.065]},{"type":"Mesh","material":"$soft","geometry":{"type":"SphereGeometry","radius":0.045,"widthSegments":16,"heightSegments":10},"position":[0.18,0.52,0.065]}]}}Or take the whole pack, which brings every entry and every material at once:
cat packs/site-assets.ndjson model.ndjson > dressed.ndjson