Fan coil unit
fan-coil-unit
dresses asset:fan-coil
— and nothing else. Appearance is invisible to the drawing set, so adding this changes no
plan, no section and no elevation.
- 4of 500 meshes
- 2slots
- 1finish
Drag to orbit · scroll to zoom
$frame
$surface
This definition leaves
$frame and $surface
open, and a look line fills them. Every combination is one body — same
geometry, same selector, same sheets — so the block below rewrites itself as you pick.
Only materials are slottable: a size would have to agree with the plan, so it stays on
the entity.
Paste this
Every part: the 2 materialdefs the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.
{"t":"materialdef","id":"pal-steel","of":"steel","value":72}
{"t":"materialdef","id":"pal-white","of":"paint","value":92}
{"t":"lookdef","id":"fan-coil-unit","for":"asset:fan-coil","desc":"Low fan-coil enclosure with a perforated grille front.","slots":{"frame":"pal-white","surface":"pal-steel"},"preview":{"projection":"perspective","azimuth":30,"elevation":14,"fov":34,"margin":1.04},"body":{"type":"Group","children":[{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":1,"height":0.3,"depth":0.22,"radius":0.08,"segments":4},"position":[0,0.15,-0.015]},{"type":"Mesh","material":"$surface","geometry":{"type":"BoxGeometry","width":0.8,"height":0.105,"depth":0.02},"position":[0,0.0725,0.115]},{"type":"bimtex:Run","count":5,"from":[0,0.0375,0],"to":[0,0.1075,0],"children":[{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.82,"height":0.012,"depth":0.025,"radius":0.004,"segments":2},"position":[0,0,0.126]}]},{"type":"bimtex:Run","count":5,"from":[-0.32,0,0],"to":[0.32,0,0],"children":[{"type":"Mesh","material":"$frame","geometry":{"type":"BoxGeometry","width":0.012,"height":0.105,"depth":0.022},"position":[0,0.0725,0.126]}]}],"scale":[0.773993817,0.99999996,0.641848521]}}Or take the whole pack, which brings every entry and every material at once:
cat packs/hotel.ndjson model.ndjson > dressed.ndjson