Flat bench
flat-bench
dresses asset:weight-bench
— and nothing else. Appearance is invisible to the drawing set, so adding this changes no
plan, no section and no elevation.
- 4of 500 meshes
- 2slots
- 1finish
Drag to orbit · scroll to zoom
$frame
$soft
This definition leaves
$frame and $soft
open, and a look line fills them. Every combination is one body — same
geometry, same selector, same sheets — so the block below rewrites itself as you pick.
Only materials are slottable: a size would have to agree with the plan, so it stays on
the entity.
Paste this
Every part: the 2 materialdefs the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.
{"t":"materialdef","id":"pal-charcoal","of":"paint","value":20}
{"t":"materialdef","id":"pal-wool-dark","of":"cloth","value":20}
{"t":"lookdef","id":"flat-bench","for":"asset:weight-bench","desc":"Low flat weight bench with a padded top and steel legs.","slots":{"frame":"pal-charcoal","soft":"pal-wool-dark"},"preview":{"projection":"perspective","azimuth":-28,"elevation":20,"fov":34,"margin":1},"body":{"type":"Group","children":[{"type":"Mesh","material":"$soft","geometry":{"type":"RoundedBoxGeometry","width":0.6,"height":0.1,"depth":1.3,"radius":0.045,"segments":3},"position":[0,0.4,0]},{"type":"bimtex:Run","count":2,"from":[0,0,-0.47],"to":[0,0,0.47],"children":[{"type":"Mesh","material":"$frame","geometry":{"type":"TubeGeometry","path":[[-0.24,0.02,0],[-0.18,0.3,0],[0.18,0.3,0],[0.24,0.02,0]],"radius":0.035,"radialSegments":10,"tubularSegments":16}}]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.08,"height":0.08,"depth":1.02,"radius":0.018,"segments":2},"position":[0,0.18,0]},{"type":"bimtex:Run","count":2,"from":[0,0,-0.47],"to":[0,0,0.47],"children":[{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.54,"height":0.035,"depth":0.12,"radius":0.012,"segments":2},"position":[0,0.0175,0]}]}],"scale":[0.78,1.03,1.55]}}Or take the whole pack, which brings every entry and every material at once:
cat packs/fitness.ndjson model.ndjson > dressed.ndjson