Luggage bench
luggage-bench
dresses asset:luggage-bench
— and nothing else. Appearance is invisible to the drawing set, so adding this changes no
plan, no section and no elevation.
- 10of 500 meshes
- 2slots
- 1finish
Drag to orbit · scroll to zoom
$frame
$surface
This definition leaves
$frame and $surface
open, and a look line fills them. Every combination is one body — same
geometry, same selector, same sheets — so the block below rewrites itself as you pick.
Only materials are slottable: a size would have to agree with the plan, so it stays on
the entity.
Paste this
Every part: the 2 materialdefs the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.
{"t":"materialdef","id":"pack-hotel-leather","of":"leather","value":58,"accent":"#b87349","body":{"sheen":0.18,"sheenColor":"#d79a70","sheenRoughness":0.65}}
{"t":"materialdef","id":"pack-hotel-walnut","of":"timber","value":42,"accent":"#5a3c2a"}
{"t":"lookdef","id":"luggage-bench","for":"asset:luggage-bench","desc":"Hotel luggage bench with webbed straps and folding legs.","slots":{"frame":"pack-hotel-walnut","surface":"pack-hotel-leather"},"preview":{"projection":"perspective","azimuth":-38,"elevation":20,"fov":34,"margin":1.04},"body":{"type":"Group","children":[{"type":"Mesh","material":"$frame","geometry":{"type":"TubeGeometry","path":[[-0.46,0,-0.195],[-0.42,0.39,-0.17]],"radius":0.035,"radialSegments":12,"tubularSegments":12}},{"type":"Mesh","material":"$frame","geometry":{"type":"TubeGeometry","path":[[0.46,0,-0.195],[0.42,0.39,-0.17]],"radius":0.035,"radialSegments":12,"tubularSegments":12}},{"type":"Mesh","material":"$frame","geometry":{"type":"TubeGeometry","path":[[-0.46,0,0.195],[-0.42,0.39,0.17]],"radius":0.035,"radialSegments":12,"tubularSegments":12}},{"type":"Mesh","material":"$frame","geometry":{"type":"TubeGeometry","path":[[0.46,0,0.195],[0.42,0.39,0.17]],"radius":0.035,"radialSegments":12,"tubularSegments":12}},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":1,"height":0.09,"depth":0.07,"radius":0.02,"segments":3},"position":[0,0.365,-0.19]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":1,"height":0.09,"depth":0.07,"radius":0.02,"segments":3},"position":[0,0.365,0.19]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.07,"height":0.09,"depth":0.38,"radius":0.02,"segments":3},"position":[-0.465,0.365,0]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.07,"height":0.09,"depth":0.38,"radius":0.02,"segments":3},"position":[0.465,0.365,0]},{"type":"bimtex:Run","count":8,"from":[-0.39,0,0],"to":[0.39,0,0],"children":[{"type":"Mesh","material":"$surface","geometry":{"type":"RoundedBoxGeometry","width":0.07,"height":0.045,"depth":0.45,"radius":0.014,"segments":3},"position":[0,0.4275,0]}]},{"type":"bimtex:Run","count":5,"from":[0,0,-0.17],"to":[0,0,0.17],"children":[{"type":"Mesh","material":"$surface","geometry":{"type":"RoundedBoxGeometry","width":0.86,"height":0.035,"depth":0.055,"radius":0.012,"segments":3},"position":[0,0.4325,0]}]}],"scale":[1,0.82,0.92]}}Or take the whole pack, which brings every entry and every material at once:
cat packs/hotel.ndjson model.ndjson > dressed.ndjson