Nail table

nail-table dresses asset:nail-table — and nothing else. Appearance is invisible to the drawing set, so adding this changes no plan, no section and no elevation.

8of 500 meshes
2slots
1finish

Drag to orbit · scroll to zoom

The build. Made here, now, by the same interpreter a model gets.

Nail table, shown as a photorealistic visual reference — **The reference.** AI-generated, not bimtex output — the authored input this body was written against.

$surface

$frame

This definition leaves $surface and $frame open, and a look line fills them. Every combination is one body — same geometry, same selector, same sheets — so the block below rewrites itself as you pick. Only materials are slottable: a size would have to agree with the plan, so it stays on the entity.

Paste this

Every part: the 3 materialdefs the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.

{"t":"materialdef","id":"pack-salon-cream","of":"cloth","value":86,"accent":"#e7ddcf"}
{"t":"materialdef","id":"pal-oak","of":"timber","value":72}
{"t":"materialdef","id":"pal-white","of":"paint","value":92}
{"t":"lookdef","id":"nail-table","for":"asset:nail-table","desc":"Manicure table with a central extractor and two work positions.","slots":{"surface":"pal-oak","frame":"pal-white"},"preview":{"projection":"perspective","azimuth":38,"elevation":22,"fov":34,"margin":1.04},"body":{"type":"Group","children":[{"type":"Mesh","material":"$surface","geometry":{"type":"RoundedBoxGeometry","width":1.5,"height":0.055,"depth":0.5,"radius":0.025,"segments":3},"position":[0,0.705,0]},{"type":"Mesh","material":"$frame","geometry":{"type":"TubeGeometry","path":[[-0.69,0.02,-0.2],[-0.69,0.68,-0.2],[-0.69,0.68,0.2],[-0.69,0.02,0.2]],"radius":0.025,"radialSegments":10,"tubularSegments":16}},{"type":"Mesh","material":"$frame","geometry":{"type":"TubeGeometry","path":[[0.69,0.02,-0.2],[0.69,0.68,-0.2],[0.69,0.68,0.2],[0.69,0.02,0.2]],"radius":0.025,"radialSegments":10,"tubularSegments":16}},{"type":"Mesh","material":"pack-salon-cream","geometry":{"type":"RoundedBoxGeometry","width":0.42,"height":0.055,"depth":0.18,"radius":0.045,"segments":3},"position":[-0.14,0.735,0]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.42,"height":0.51,"depth":0.43,"radius":0.018,"segments":3},"position":[0.48,0.39,0]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.38,"height":0.135,"depth":0.025,"radius":0.01,"segments":2},"position":[0.48,0.22,0.228]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.38,"height":0.135,"depth":0.025,"radius":0.01,"segments":2},"position":[0.48,0.37,0.228]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.38,"height":0.135,"depth":0.025,"radius":0.01,"segments":2},"position":[0.48,0.52,0.228]}]}}

Or take the whole pack, which brings every entry and every material at once:

cat packs/salon.ndjson model.ndjson > dressed.ndjson

Download salon pack 25 KB · NDJSON ↓