Pocket door set

pocket-door-set dresses opening:pocket — and nothing else. Appearance is invisible to the drawing set, so adding this changes no plan, no section and no elevation.

8of 500 meshes
3slots
1finish

Drag to orbit · scroll to zoom

The build. Made here, now, by the same interpreter a model gets.

Pocket door set, shown as a photorealistic visual reference — **The reference.** AI-generated, not bimtex output — the authored input this body was written against.

$frame:bark

$frame

$hardware

This definition leaves $frame:bark and $frame and $hardware open, and a look line fills them. Every combination is one body — same geometry, same selector, same sheets — so the block below rewrites itself as you pick. Only materials are slottable: a size would have to agree with the plan, so it stays on the entity.

Paste this

Every part: the 3 materialdefs the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.

{"t":"materialdef","id":"wr-charcoal","of":"steel","value":20,"accent":"#41484d","body":{"metalness":0.38}}
{"t":"materialdef","id":"wr-chrome","of":"chrome","value":80,"accent":"#aeb3b2","body":{"metalness":0.82}}
{"t":"materialdef","id":"wr-oak","of":"timber","value":58,"accent":"#9b744f","hatch":"timber","body":{"roughness":0.68}}
{"t":"lookdef","id":"pocket-door-set","name":"Pocket door set","for":"opening:pocket","desc":"Complete oak sliding leaf, slim track and structurally legible open pocket cassette.","slots":{"frame:bark":"wr-oak","frame":"wr-charcoal","hardware":"wr-chrome"},"body":{"type":"Group","children":[{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.055,"height":1,"depth":0.12,"radius":0.012},"position":[-0.472,0.5,0]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.055,"height":1,"depth":0.12,"radius":0.012},"position":[0.472,0.5,0]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":1,"height":0.055,"depth":0.12,"radius":0.012},"position":[0,0.972,0]},{"type":"Mesh","material":"$frame:bark","geometry":{"type":"RoundedBoxGeometry","width":0.49,"height":0.88,"depth":0.055,"radius":0.012},"position":[0.06,0.48,0.04]},{"type":"Mesh","material":"$hardware","geometry":{"type":"RoundedBoxGeometry","width":0.02,"height":0.13,"depth":0.014,"radius":0.005},"position":[-0.13,0.49,0.075]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.035,"height":0.9,"depth":0.05,"radius":0.008},"position":[0.28,0.49,-0.035]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.035,"height":0.9,"depth":0.05,"radius":0.008},"position":[0.44,0.49,-0.035]},{"type":"bimtex:Run","count":6,"from":[0,0.14,0],"to":[0,0.84,0],"children":[{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.16,"height":0.025,"depth":0.045,"radius":0.006},"position":[0.36,0,-0.035]}]}]},"preview":{"projection":"perspective","azimuth":34,"elevation":18,"fov":34,"margin":1.05}}

Or take the whole pack, which brings every entry and every material at once:

cat packs/residential-warm.ndjson model.ndjson > dressed.ndjson

Download residential-warm pack 26 KB · NDJSON ↓