Sectional overhead door
sectional-overhead-door
dresses opening:overhead
— and nothing else. Appearance is invisible to the drawing set, so adding this changes no
plan, no section and no elevation.
- 14of 500 meshes
- 4slots
- 1finish
Drag to orbit · scroll to zoom
$frame
$surface:panel
$surface:seal
$hardware
This definition leaves
$frame and $surface:panel and $surface:seal and $hardware
open, and a look line fills them. Every combination is one body — same
geometry, same selector, same sheets — so the block below rewrites itself as you pick.
Only materials are slottable: a size would have to agree with the plan, so it stays on
the entity.
Paste this
Every part: the 2 materialdefs the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.
{"t":"materialdef","id":"pal-steel","of":"steel","value":72}
{"t":"materialdef","id":"pal-steel-dark","of":"steel","value":20}
{"t":"lookdef","id":"sectional-overhead-door","for":"opening:overhead","desc":"Industrial sectional overhead door with horizontal glazed panels.","slots":{"frame":"pal-steel-dark","surface:panel":"pal-steel","surface:seal":"pal-steel-dark","hardware":"pal-steel"},"note":"Standalone sectional overhead doorset with one perimeter frame, five articulated panels, weather seals, hinges and pull. No host wall or duplicate back frame is included.","body":{"type":"Group","scale":[1.75,1,0.16],"children":[{"type":"Mesh","material":"$frame","geometry":{"type":"BoxGeometry","width":0.055,"height":1,"depth":1},"position":[-0.4725,0.5,0]},{"type":"Mesh","material":"$frame","geometry":{"type":"BoxGeometry","width":0.055,"height":1,"depth":1},"position":[0.4725,0.5,0]},{"type":"Mesh","material":"$frame","geometry":{"type":"BoxGeometry","width":0.89,"height":0.055,"depth":1},"position":[0,0.9725,0]},{"type":"Mesh","material":"$surface:panel","geometry":{"type":"RoundedBoxGeometry","width":0.88,"height":0.17,"depth":0.12,"radius":0.014},"position":[0,0.105,0.18]},{"type":"Mesh","material":"$surface:panel","geometry":{"type":"RoundedBoxGeometry","width":0.88,"height":0.17,"depth":0.12,"radius":0.014},"position":[0,0.285,0.18]},{"type":"Mesh","material":"$surface:panel","geometry":{"type":"RoundedBoxGeometry","width":0.88,"height":0.17,"depth":0.12,"radius":0.014},"position":[0,0.465,0.18]},{"type":"Mesh","material":"$surface:panel","geometry":{"type":"RoundedBoxGeometry","width":0.88,"height":0.17,"depth":0.12,"radius":0.014},"position":[0,0.645,0.18]},{"type":"Mesh","material":"$surface:panel","geometry":{"type":"RoundedBoxGeometry","width":0.88,"height":0.17,"depth":0.12,"radius":0.014},"position":[0,0.825,0.18]},{"type":"Mesh","material":"$surface:seal","geometry":{"type":"BoxGeometry","width":0.89,"height":0.025,"depth":0.16},"position":[0,0.0125,0.18]},{"type":"Mesh","material":"$hardware","geometry":{"type":"RoundedBoxGeometry","width":0.06,"height":0.035,"depth":0.035,"radius":0.008},"position":[-0.24,0.195,0.27]},{"type":"Mesh","material":"$hardware","geometry":{"type":"RoundedBoxGeometry","width":0.06,"height":0.035,"depth":0.035,"radius":0.008},"position":[0.24,0.195,0.27]},{"type":"Mesh","material":"$hardware","geometry":{"type":"RoundedBoxGeometry","width":0.06,"height":0.035,"depth":0.035,"radius":0.008},"position":[-0.24,0.555,0.27]},{"type":"Mesh","material":"$hardware","geometry":{"type":"RoundedBoxGeometry","width":0.06,"height":0.035,"depth":0.035,"radius":0.008},"position":[0.24,0.555,0.27]},{"type":"Mesh","material":"$hardware","geometry":{"type":"RoundedBoxGeometry","width":0.13,"height":0.032,"depth":0.045,"radius":0.01},"position":[0,0.265,0.29]}]}}Or take the whole pack, which brings every entry and every material at once:
cat packs/openings.ndjson model.ndjson > dressed.ndjson