bimtex

assembly

Stage platform

stage-platform dresses asset:stage — and nothing else. Appearance is invisible to the drawing set, so adding this changes no plan, no section and no elevation.

  • 7of 500 meshes
  • 2slots
  • 1finish

Drag to orbit · scroll to zoom

The build. Made here, now, by the same interpreter a model gets.
Stage platform, shown as a photorealistic visual reference
The reference. AI-generated, not bimtex output — the authored input this body was written against.
$surface:deck
$surface:skirt

This definition leaves $surface:deck and $surface:skirt open, and a look line fills them. Every combination is one body — same geometry, same selector, same sheets — so the block below rewrites itself as you pick. Only materials are slottable: a size would have to agree with the plan, so it stays on the entity.

Paste this

Every part: the 1 materialdef the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.

{"t":"materialdef","id":"pal-charcoal","of":"paint","value":20}
{"t":"lookdef","id":"stage-platform","for":"asset:stage","desc":"Low modular stage platform with skirted front and stepped apron.","slots":{"surface:deck":"pal-charcoal","surface:skirt":"pal-charcoal"},"preview":{"projection":"perspective","azimuth":38,"elevation":22,"fov":34,"margin":1.04},"body":{"type":"Group","children":[{"type":"Mesh","material":"$surface:deck","geometry":{"type":"BoxGeometry","width":4,"height":0.08,"depth":1.8},"position":[0,0.36,-0.3]},{"type":"Mesh","material":"$surface:skirt","geometry":{"type":"BoxGeometry","width":4,"height":0.32,"depth":0.04},"position":[0,0.16,0.58]},{"type":"Mesh","material":"$surface:skirt","geometry":{"type":"BoxGeometry","width":0.04,"height":0.32,"depth":1.76},"position":[-1.98,0.16,-0.3]},{"type":"Mesh","material":"$surface:skirt","geometry":{"type":"BoxGeometry","width":0.04,"height":0.32,"depth":1.76},"position":[1.98,0.16,-0.3]},{"type":"bimtex:Run","count":18,"from":[-1.86,0,0],"to":[1.86,0,0],"children":[{"type":"Mesh","material":"$surface:skirt","geometry":{"type":"RoundedBoxGeometry","width":0.06,"height":0.29,"depth":0.025,"radius":0.008,"segments":2},"position":[0,0.155,0.606]}]},{"type":"Mesh","material":"$surface:deck","geometry":{"type":"BoxGeometry","width":3.6,"height":0.06,"depth":0.6},"position":[0,0.18,0.88]},{"type":"Mesh","material":"$surface:skirt","geometry":{"type":"BoxGeometry","width":3.6,"height":0.15,"depth":0.04},"position":[0,0.075,1.18]}],"scale":[0.533333331,0.879120879,0.888888893]}}

Or take the whole pack, which brings every entry and every material at once:

cat packs/assembly.ndjson model.ndjson > dressed.ndjson
Download assembly pack 18 KB · NDJSON ↓