Waiting bench
waiting-bench
dresses asset:waiting-bench
— and nothing else. Appearance is invisible to the drawing set, so adding this changes no
plan, no section and no elevation.
- 5of 500 meshes
- 2slots
- 1finish
Drag to orbit · scroll to zoom
$soft
$frame
This definition leaves
$soft and $frame
open, and a look line fills them. Every combination is one body — same
geometry, same selector, same sheets — so the block below rewrites itself as you pick.
Only materials are slottable: a size would have to agree with the plan, so it stays on
the entity.
Paste this
Every part: the 2 materialdefs the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.
{"t":"materialdef","id":"pack-salon-black","of":"leather","value":20,"accent":"#252525"}
{"t":"materialdef","id":"pack-salon-cream","of":"cloth","value":86,"accent":"#e7ddcf"}
{"t":"lookdef","id":"waiting-bench","for":"asset:waiting-bench","desc":"Upholstered salon waiting bench with a low continuous back.","slots":{"soft":"pack-salon-cream","frame":"pack-salon-black"},"preview":{"projection":"perspective","azimuth":-38,"elevation":22,"fov":34,"margin":1.04},"body":{"type":"Group","children":[{"type":"Mesh","material":"$soft","geometry":{"type":"RoundedBoxGeometry","width":1.6,"height":0.16,"depth":0.5,"radius":0.075,"segments":3},"position":[0,0.48,0]},{"type":"Mesh","material":"$soft","geometry":{"type":"RoundedBoxGeometry","width":1.52,"height":0.34,"depth":0.1,"radius":0.07,"segments":3},"position":[0,0.63,-0.25],"rotation":[-0.06,0,0]},{"type":"bimtex:Run","count":2,"from":[-0.68,0,-0.27],"to":[0.68,0,-0.27],"children":[{"type":"Mesh","material":"$frame","geometry":{"type":"CylinderGeometry","radiusTop":0.03,"radiusBottom":0.03,"height":0.4,"radialSegments":14},"position":[0,0.2,0]}]},{"type":"bimtex:Run","count":2,"from":[-0.68,0,0.27],"to":[0.68,0,0.27],"children":[{"type":"Mesh","material":"$frame","geometry":{"type":"CylinderGeometry","radiusTop":0.03,"radiusBottom":0.03,"height":0.4,"radialSegments":14},"position":[0,0.2,0]}]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":1.4,"height":0.05,"depth":0.05,"radius":0.014,"segments":2},"position":[0,0.34,-0.2]}],"scale":[0.575851172,1.327377184,0.52631578]}}Or take the whole pack, which brings every entry and every material at once:
cat packs/salon.ndjson model.ndjson > dressed.ndjson