Dock leveller
dock-leveller
dresses asset:dock-leveler
— and nothing else. Appearance is invisible to the drawing set, so adding this changes no
plan, no section and no elevation.
- 5of 500 meshes
- 1slot
- 1finish
Drag to orbit · scroll to zoom
$hardware
This definition leaves
$hardware
open, and a look line fills them. Every combination is one body — same
geometry, same selector, same sheets — so the block below rewrites itself as you pick.
Only materials are slottable: a size would have to agree with the plan, so it stays on
the entity.
Paste this
Every part: the 1 materialdef the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.
{"t":"materialdef","id":"pal-steel","of":"steel","value":72}
{"t":"lookdef","id":"dock-leveller","for":"asset:dock-leveler","desc":"Recessed loading-dock leveller with hinged lip and tread surface.","slots":{"hardware":"pal-steel"},"preview":{"projection":"perspective","azimuth":-38,"elevation":28,"fov":34,"margin":1.03},"body":{"type":"Group","children":[{"type":"Mesh","material":"$hardware","geometry":{"type":"BoxGeometry","width":2,"height":0.08,"depth":2.1},"position":[0,0.04,-0.2]},{"type":"Mesh","material":"$hardware","geometry":{"type":"BoxGeometry","width":0.06,"height":0.16,"depth":2.1},"position":[-0.97,0.12,-0.2]},{"type":"Mesh","material":"$hardware","geometry":{"type":"BoxGeometry","width":0.06,"height":0.16,"depth":2.1},"position":[0.97,0.12,-0.2]},{"type":"Mesh","material":"$hardware","geometry":{"type":"BoxGeometry","width":1.88,"height":0.35,"depth":0.05},"position":[0,0.19,0.88]},{"type":"bimtex:Run","count":12,"from":[-0.43,0,0],"to":[0.43,0,0],"children":[{"type":"Mesh","material":"$hardware","geometry":{"type":"CylinderGeometry","radiusTop":0.025,"radiusBottom":0.025,"height":0.12,"radialSegments":12}}],"position":[0,0.11,0.79],"rotation":[1.5708,0,0]}]}}Or take the whole pack, which brings every entry and every material at once:
cat packs/warehouse.ndjson model.ndjson > dressed.ndjson