Entry porch canopy
entry-porch-canopy
dresses asset:entry-porch
— and nothing else. Appearance is invisible to the drawing set, so adding this changes no
plan, no section and no elevation.
- 3of 500 meshes
- 2slots
- 1finish
Drag to orbit · scroll to zoom
$frame
$surface
This definition leaves
$frame and $surface
open, and a look line fills them. Every combination is one body — same
geometry, same selector, same sheets — so the block below rewrites itself as you pick.
Only materials are slottable: a size would have to agree with the plan, so it stays on
the entity.
Paste this
Every part: the 2 materialdefs the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.
{"t":"materialdef","id":"pack-site-timber","of":"timber","value":42,"accent":"#8b603d","body":{"roughness":0.74}}
{"t":"materialdef","id":"pal-white","of":"paint","value":92}
{"t":"lookdef","id":"entry-porch-canopy","for":"asset:entry-porch","desc":"Small entry canopy with posts, shallow roof, and brackets.","slots":{"frame":"pack-site-timber","surface":"pal-white"},"body":{"type":"Group","children":[{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.16,"height":2.38,"depth":0.16,"radius":0.012,"segments":2},"position":[-0.94,1.19,0.28]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.16,"height":2.38,"depth":0.16,"radius":0.012,"segments":2},"position":[0.94,1.19,0.28]},{"type":"Mesh","material":"$surface","geometry":{"type":"BoxGeometry","width":2.4,"height":0.22,"depth":1.2},"position":[0,2.49,0]}],"scale":[0.99999996,0.999999978,0.99999996]}}Or take the whole pack, which brings every entry and every material at once:
cat packs/site-assets.ndjson model.ndjson > dressed.ndjson