Folding shower seat
folding-shower-seat
dresses asset:shower-seat
— and nothing else. Appearance is invisible to the drawing set, so adding this changes no
plan, no section and no elevation.
- 5of 500 meshes
- 2slots
- 1finish
Drag to orbit · scroll to zoom
$soft
$hardware
This definition leaves
$soft and $hardware
open, and a look line fills them. Every combination is one body — same
geometry, same selector, same sheets — so the block below rewrites itself as you pick.
Only materials are slottable: a size would have to agree with the plan, so it stays on
the entity.
Paste this
Every part: the 2 materialdefs the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.
{"t":"materialdef","id":"wr-chrome","of":"chrome","value":80,"accent":"#aeb3b2","body":{"metalness":0.82}}
{"t":"materialdef","id":"wr-ivory","of":"cloth","value":86,"accent":"#ebe5dc"}
{"t":"lookdef","id":"folding-shower-seat","name":"Folding shower seat","for":"asset:shower-seat","desc":"Wall-mounted accessible slatted seat with two articulated chrome supports and complete backplates.","slots":{"soft":"wr-ivory","hardware":"wr-chrome"},"body":{"type":"Group","children":[{"type":"bimtex:Run","count":2,"from":[-0.36,0,0],"to":[0.36,0,0],"children":[{"type":"Mesh","material":"$hardware","geometry":{"type":"RoundedBoxGeometry","width":0.11,"height":0.32,"depth":0.04,"radius":0.025},"position":[0,0.54,-0.24]},{"type":"Mesh","material":"$hardware","geometry":{"type":"CylinderGeometry","radiusTop":0.04,"radiusBottom":0.04,"height":0.13,"radialSegments":16},"position":[0,0.48,-0.19],"rotation":[0,0,1.5708]},{"type":"Mesh","material":"$hardware","geometry":{"type":"TubeGeometry","path":[[0,0.49,-0.2],[0,0.32,0.22],[0,0.38,0.25]],"radius":0.022,"tubularSegments":14,"radialSegments":9,"curve":"spline"}},{"type":"Mesh","material":"$hardware","geometry":{"type":"TubeGeometry","path":[[0,0.3,-0.2],[0,0.3,0.2],[0,0.38,0.25]],"radius":0.018,"tubularSegments":12,"radialSegments":9,"curve":"spline"}}]},{"type":"bimtex:Run","count":5,"from":[-0.32,0,0],"to":[0.32,0,0],"children":[{"type":"Mesh","material":"$soft","geometry":{"type":"RoundedBoxGeometry","width":0.14,"height":0.055,"depth":0.5,"radius":0.022},"position":[0,0.4,0.02]}]}]},"preview":{"projection":"perspective","azimuth":-38,"elevation":24,"fov":34,"margin":1.08}}Or take the whole pack, which brings every entry and every material at once:
cat packs/residential-warm.ndjson model.ndjson > dressed.ndjson