Straight clothing rail
straight-clothing-rail
dresses furniture:clothing-rack
— and nothing else. Appearance is invisible to the drawing set, so adding this changes no
plan, no section and no elevation.
- 14of 500 meshes
- 2slots
- 1finish
Drag to orbit · scroll to zoom
$frame
$soft
This definition leaves
$frame and $soft
open, and a look line fills them. Every combination is one body — same
geometry, same selector, same sheets — so the block below rewrites itself as you pick.
Only materials are slottable: a size would have to agree with the plan, so it stays on
the entity.
Paste this
Every part: the 3 materialdefs the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.
{"t":"materialdef","id":"pack-retail-linen","of":"cloth","value":80,"accent":"#d9d0c2"}
{"t":"materialdef","id":"pack-retail-white","of":"paint","value":92,"accent":"#f2f1ec","body":{"roughness":0.38}}
{"t":"materialdef","id":"pal-steel","of":"steel","value":72}
{"t":"lookdef","id":"straight-clothing-rail","for":"furniture:clothing-rack","desc":"A-frame clothing rail with ten separated shirts, shaped hangers, and low braces.","slots":{"frame":"pal-steel","soft":"pack-retail-linen"},"preview":{"projection":"perspective","azimuth":-38,"elevation":18,"fov":34,"margin":1.04},"body":{"type":"Group","children":[{"type":"Mesh","material":"$frame","geometry":{"type":"CylinderGeometry","radiusTop":0.025,"radiusBottom":0.025,"height":1.45,"radialSegments":18},"position":[0,1.45,0],"rotation":[0,0,1.5708]},{"type":"Mesh","material":"$frame","geometry":{"type":"TubeGeometry","path":[[-0.725,0.005,-0.275],[-0.62,1.45,0]],"radius":0.025,"radialSegments":12,"tubularSegments":18}},{"type":"Mesh","material":"$frame","geometry":{"type":"TubeGeometry","path":[[-0.725,0.005,0.275],[-0.62,1.45,0]],"radius":0.025,"radialSegments":12,"tubularSegments":18}},{"type":"Mesh","material":"$frame","geometry":{"type":"TubeGeometry","path":[[0.725,0.005,-0.275],[0.62,1.45,0]],"radius":0.025,"radialSegments":12,"tubularSegments":18}},{"type":"Mesh","material":"$frame","geometry":{"type":"TubeGeometry","path":[[0.725,0.005,0.275],[0.62,1.45,0]],"radius":0.025,"radialSegments":12,"tubularSegments":18}},{"type":"bimtex:Run","count":5,"from":[-0.42,0,-0.08],"to":[0.327,0,0.06],"children":[{"type":"Mesh","material":"$soft","geometry":{"type":"ExtrudeGeometry","profile":[[-0.075,0],[0.075,0],[0.075,0.58],[0.13,0.68],[0.09,0.79],[0.04,0.76],[0.025,0.82],[-0.025,0.82],[-0.04,0.76],[-0.09,0.79],[-0.13,0.68],[-0.075,0.58]],"depth":0.03,"bevelEnabled":false},"position":[0,0.43,-0.015]}]},{"type":"bimtex:Run","count":5,"from":[-0.327,0,-0.06],"to":[0.42,0,0.08],"children":[{"type":"Mesh","material":"pack-retail-white","geometry":{"type":"ExtrudeGeometry","profile":[[-0.075,0],[0.075,0],[0.075,0.58],[0.13,0.68],[0.09,0.79],[0.04,0.76],[0.025,0.82],[-0.025,0.82],[-0.04,0.76],[-0.09,0.79],[-0.13,0.68],[-0.075,0.58]],"depth":0.03,"bevelEnabled":false},"position":[0,0.43,-0.015]}]},{"type":"bimtex:Run","count":10,"from":[-0.42,0,-0.05],"to":[0.42,0,0.05],"children":[{"type":"Mesh","material":"$frame","geometry":{"type":"TubeGeometry","path":[[-0.22,1.23,0],[0,1.41,0],[0.22,1.23,0]],"radius":0.009,"radialSegments":8,"tubularSegments":12}}]},{"type":"Mesh","material":"$frame","geometry":{"type":"TubeGeometry","path":[[-0.7,0.15,-0.24],[0.7,0.15,-0.24]],"radius":0.018,"radialSegments":10,"tubularSegments":12}},{"type":"Mesh","material":"$frame","geometry":{"type":"TubeGeometry","path":[[-0.7,0.15,0.24],[0.7,0.15,0.24]],"radius":0.018,"radialSegments":10,"tubularSegments":12}},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.05,"height":0.012,"depth":0.05,"radius":0.006,"segments":2},"position":[-0.725,0.006,-0.275]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.05,"height":0.012,"depth":0.05,"radius":0.006,"segments":2},"position":[-0.725,0.006,0.275]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.05,"height":0.012,"depth":0.05,"radius":0.006,"segments":2},"position":[0.725,0.006,-0.275]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.05,"height":0.012,"depth":0.05,"radius":0.006,"segments":2},"position":[0.725,0.006,0.275]}]}}Or take the whole pack, which brings every entry and every material at once:
cat packs/retail.ndjson model.ndjson > dressed.ndjson