Front load washer

front-load-washer dresses furniture:washer — and nothing else. Appearance is invisible to the drawing set, so adding this changes no plan, no section and no elevation.

8of 500 meshes
2slots
1finish

Drag to orbit · scroll to zoom

The build. Made here, now, by the same interpreter a model gets.

Front load washer, shown as a photorealistic visual reference — **The reference.** AI-generated, not bimtex output — the authored input this body was written against.

$frame

$accent

This definition leaves $frame and $accent open, and a look line fills them. Every combination is one body — same geometry, same selector, same sheets — so the block below rewrites itself as you pick. Only materials are slottable: a size would have to agree with the plan, so it stays on the entity.

Paste this

Every part: the 3 materialdefs the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.

{"t":"materialdef","id":"pack-int-glass","of":"glass","value":86,"body":{"type":"MeshPhysicalMaterial","transmission":0.92,"ior":1.5,"thickness":0.02}}
{"t":"materialdef","id":"pal-ceramic","of":"ceramic","value":92}
{"t":"materialdef","id":"pal-charcoal","of":"paint","value":20}
{"t":"lookdef","id":"front-load-washer","for":"furniture:washer","desc":"Front-loading washing machine with circular glazed door and upper controls.","slots":{"frame":"pal-ceramic","accent":"pal-charcoal"},"preview":{"projection":"perspective","azimuth":34,"elevation":15,"fov":34,"margin":1.04},"body":{"type":"Group","children":[{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.69,"height":0.95,"depth":0.7,"radius":0.025,"segments":3},"position":[0,0.5,-0.025]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.69,"height":0.05,"depth":0.7,"radius":0.018,"segments":3},"position":[0,0.975,-0.025]},{"type":"bimtex:Run","count":2,"from":[-0.135,0.00625,-0.145],"to":[0.135,0.00625,-0.145],"children":[{"type":"Mesh","material":"$accent","geometry":{"type":"BoxGeometry","width":0.08,"height":0.025,"depth":0.08}}]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.62,"height":0.13,"depth":0.035,"radius":0.012,"segments":3},"position":[0,0.88,0.3425]},{"type":"Mesh","material":"$accent","geometry":{"type":"TorusGeometry","radius":0.225,"tube":0.035,"radialSegments":14,"tubularSegments":28},"position":[0,0.52,0.34]},{"type":"Mesh","material":"pack-int-glass","geometry":{"type":"CylinderGeometry","radiusTop":0.19,"radiusBottom":0.19,"height":0.035,"radialSegments":24},"position":[0,0.52,0.3575],"rotation":[1.5708,0,0]},{"type":"Mesh","material":"$accent","geometry":{"type":"CylinderGeometry","radiusTop":0.035,"radiusBottom":0.035,"height":0.018,"radialSegments":18},"position":[0.21,0.88,0.365],"rotation":[1.5708,0,0]},{"type":"bimtex:Run","count":3,"from":[-0.09,0.44,0.352],"to":[0.01,0.44,0.352],"children":[{"type":"Mesh","material":"$accent","geometry":{"type":"CylinderGeometry","radiusTop":0.012,"radiusBottom":0.012,"height":0.015,"radialSegments":12}}]}]}}

Or take the whole pack, which brings every entry and every material at once:

cat packs/interiors.ndjson model.ndjson > dressed.ndjson

Download interiors pack 119 KB · NDJSON ↓