Grab rail set
grab-rail-set
dresses asset:grab-rail
— and nothing else. Appearance is invisible to the drawing set, so adding this changes no
plan, no section and no elevation.
- 5of 500 meshes
- 1slot
- 1finish
Drag to orbit · scroll to zoom
$hardware
This definition leaves
$hardware
open, and a look line fills them. Every combination is one body — same
geometry, same selector, same sheets — so the block below rewrites itself as you pick.
Only materials are slottable: a size would have to agree with the plan, so it stays on
the entity.
Paste this
Every part: the 1 materialdef the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.
{"t":"materialdef","id":"pal-steel","of":"steel","value":72}
{"t":"lookdef","id":"grab-rail-set","for":"asset:grab-rail","desc":"Paired wall grab rails with horizontal and angled support bars.","slots":{"hardware":"pal-steel"},"preview":{"projection":"perspective","azimuth":-34,"elevation":18,"fov":34,"margin":1.05},"body":{"type":"Group","children":[{"type":"Mesh","material":"$hardware","geometry":{"type":"TubeGeometry","path":[[-0.4,0.85,0],[0.4,0.85,0]],"radius":0.05,"radialSegments":14,"tubularSegments":12,"curve":"spline"}},{"type":"bimtex:Run","count":2,"from":[-0.4,0.85,0],"to":[0.4,0.85,0],"children":[{"type":"Mesh","material":"$hardware","geometry":{"type":"CylinderGeometry","radiusTop":0.09,"radiusBottom":0.09,"height":0.1,"radialSegments":20},"rotation":[1.5708,0,0]}]},{"type":"Mesh","material":"$hardware","geometry":{"type":"RoundedBoxGeometry","width":0.12,"height":0.58,"depth":0.1,"radius":0.035,"segments":3},"position":[-0.36,0.29,0]},{"type":"Mesh","material":"$hardware","geometry":{"type":"TubeGeometry","path":[[-0.3,0.5,0],[0.32,0.5,0],[0.4,0.42,0],[0.4,0.08,0],[0.32,0,0],[-0.3,0,0]],"radius":0.035,"radialSegments":12,"tubularSegments":22,"curve":"spline"}},{"type":"Mesh","material":"$hardware","geometry":{"type":"CylinderGeometry","radiusTop":0.045,"radiusBottom":0.045,"height":0.5,"radialSegments":14},"position":[0.02,0.25,0]}],"scale":[0.505617972,0.94355261,0.101010063]}}Or take the whole pack, which brings every entry and every material at once:
cat packs/clinic.ndjson model.ndjson > dressed.ndjson