Waiting chair row
waiting-chair-row
dresses furniture:row-chairs
— and nothing else. Appearance is invisible to the drawing set, so adding this changes no
plan, no section and no elevation.
- 5of 500 meshes
- 2slots
- 1finish
Drag to orbit · scroll to zoom
$soft
$frame
This definition leaves
$soft and $frame
open, and a look line fills them. Every combination is one body — same
geometry, same selector, same sheets — so the block below rewrites itself as you pick.
Only materials are slottable: a size would have to agree with the plan, so it stays on
the entity.
Paste this
Every part: the 2 materialdefs the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.
{"t":"materialdef","id":"pack-clinic-teal","of":"cloth","value":42,"accent":"#245d60"}
{"t":"materialdef","id":"pal-steel","of":"steel","value":72}
{"t":"lookdef","id":"waiting-chair-row","for":"furniture:row-chairs","desc":"Linked waiting-room chairs with perforated seats and shared frame.","slots":{"soft":"pack-clinic-teal","frame":"pal-steel"},"preview":{"projection":"perspective","azimuth":-38,"elevation":20,"fov":34,"margin":1.03},"body":{"type":"Group","children":[{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":2.2,"height":0.09,"depth":0.1,"radius":0.018,"segments":2},"position":[0,0.4,0]},{"type":"bimtex:Run","count":4,"from":[-0.81,0,0],"to":[0.81,0,0],"children":[{"type":"Mesh","material":"$soft","geometry":{"type":"RoundedBoxGeometry","width":0.5,"height":0.12,"depth":0.48,"radius":0.065,"segments":3},"position":[0,0.52,0.02],"rotation":[-0.04,0,0]}]},{"type":"bimtex:Run","count":4,"from":[-0.81,0,0],"to":[0.81,0,0],"children":[{"type":"Mesh","material":"$soft","geometry":{"type":"RoundedBoxGeometry","width":0.5,"height":0.34,"depth":0.1,"radius":0.065,"segments":3},"position":[0,0.68,-0.225],"rotation":[-0.06,0,0]}]},{"type":"bimtex:Run","count":2,"from":[-0.88,0,0],"to":[0.88,0,0],"children":[{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.08,"height":0.4,"depth":0.08,"radius":0.014,"segments":2},"position":[0,0.2,0]}]},{"type":"bimtex:Run","count":2,"from":[-0.88,0,0],"to":[0.88,0,0],"children":[{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.12,"height":0.06,"depth":0.55,"radius":0.016,"segments":2},"position":[0,0.03,0]}]}],"scale":[0.588235293,0.569983942,0.658113804]}}Or take the whole pack, which brings every entry and every material at once:
cat packs/clinic.ndjson model.ndjson > dressed.ndjson