Rooftop package unit
rooftop-package-unit
dresses asset:rtu
— and nothing else. Appearance is invisible to the drawing set, so adding this changes no
plan, no section and no elevation.
- 8of 500 meshes
- 2slots
- 1finish
Drag to orbit · scroll to zoom
$frame
$surface
This definition leaves
$frame and $surface
open, and a look line fills them. Every combination is one body — same
geometry, same selector, same sheets — so the block below rewrites itself as you pick.
Only materials are slottable: a size would have to agree with the plan, so it stays on
the entity.
Paste this
Every part: the 2 materialdefs the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.
{"t":"materialdef","id":"pack-envelope-beige-steel","of":"steel","value":80,"accent":"#c9bea6","body":{"roughness":0.48,"metalness":0.38}}
{"t":"materialdef","id":"pal-steel-dark","of":"steel","value":20}
{"t":"lookdef","id":"rooftop-package-unit","for":"asset:rtu","desc":"Boxy rooftop HVAC package unit with louvred panels and top fan.","slots":{"frame":"pack-envelope-beige-steel","surface":"pal-steel-dark"},"preview":{"projection":"perspective","azimuth":38,"elevation":20,"fov":34,"margin":1},"body":{"type":"Group","children":[{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":2.2,"height":0.18,"depth":1.4,"radius":0.035,"segments":3},"position":[0,0.09,0]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":2.1,"height":0.88,"depth":1.3,"radius":0.09,"segments":4},"position":[0,0.64,0]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":2.08,"height":0.14,"depth":1.28,"radius":0.07,"segments":3},"position":[0,1.13,0]},{"type":"Mesh","material":"$surface","geometry":{"type":"BoxGeometry","width":0.78,"height":0.58,"depth":0.025},"position":[-0.55,0.69,0.6625]},{"type":"Mesh","material":"$surface","geometry":{"type":"BoxGeometry","width":0.78,"height":0.58,"depth":0.025},"position":[0.55,0.69,0.6625]},{"type":"bimtex:Run","count":10,"from":[0,0.45,0],"to":[0,0.93,0],"children":[{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.8,"height":0.025,"depth":0.035,"radius":0.006,"segments":2},"position":[-0.55,0,0.678],"rotation":[0.1,0,0]}]},{"type":"bimtex:Run","count":10,"from":[0,0.45,0],"to":[0,0.93,0],"children":[{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.8,"height":0.025,"depth":0.035,"radius":0.006,"segments":2},"position":[0.55,0,0.678],"rotation":[0.1,0,0]}]},{"type":"bimtex:Run","count":8,"from":[0,0.5,-0.42],"to":[0,0.9,-0.42],"children":[{"type":"Mesh","material":"$surface","geometry":{"type":"RoundedBoxGeometry","width":0.035,"height":0.025,"depth":0.72,"radius":0.006,"segments":2},"position":[1.067,0,0]}]}],"scale":[0.48,0.82,0.525]}}Or take the whole pack, which brings every entry and every material at once:
cat packs/envelope.ndjson model.ndjson > dressed.ndjson