Kinder chair 2

kinder-chair-2 dresses furniture:chair — and nothing else. Appearance is invisible to the drawing set, so adding this changes no plan, no section and no elevation.

10of 500 meshes
2slots
4finishes

Drag to orbit · scroll to zoom

The build. Made here, now, by the same interpreter a model gets.

Kinder chair 2, shown as a photorealistic visual reference — **The reference.** AI-generated, not bimtex output — the authored input this body was written against.

$soft

$frame

This definition leaves $soft and $frame open, and a look line fills them. Every combination is one body — same geometry, same selector, same sheets — so the block below rewrites itself as you pick. Only materials are slottable: a size would have to agree with the plan, so it stays on the entity.

Paste this

Every part: the 2 materialdefs the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.

{"t":"materialdef","id":"pack-cls-sun","of":"paint","value":72,"accent":"#e8a83c","body":{"roughness":0.6}}
{"t":"materialdef","id":"pal-oak-pale","of":"timber","value":80}
{"t":"lookdef","id":"kinder-chair-2","for":"furniture:chair","desc":"Rounded child chair with a broad back and splayed legs.","slots":{"soft":"pack-cls-sun","frame":"pal-oak-pale"},"body":{"type":"Group","children":[{"type":"Mesh","material":"$soft","geometry":{"type":"RoundedBoxGeometry","width":0.62,"height":0.075,"depth":0.55,"radius":0.065,"segments":3},"position":[0,0.43,0.02],"rotation":[-0.035,0,0]},{"type":"Mesh","material":"$soft","geometry":{"type":"RoundedBoxGeometry","width":0.58,"height":0.37,"depth":0.075,"radius":0.07,"segments":3},"position":[0,0.76,-0.25],"rotation":[-0.07,0,0]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.055,"height":0.43,"depth":0.055,"radius":0.018,"segments":3},"position":[-0.24,0.22,0.2],"rotation":[0.08,0,-0.05]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.055,"height":0.43,"depth":0.055,"radius":0.018,"segments":3},"position":[0.24,0.22,0.2],"rotation":[0.08,0,0.05]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.055,"height":0.43,"depth":0.055,"radius":0.018,"segments":3},"position":[-0.24,0.22,-0.2],"rotation":[-0.06,0,-0.04]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.055,"height":0.43,"depth":0.055,"radius":0.018,"segments":3},"position":[0.24,0.22,-0.2],"rotation":[-0.06,0,0.04]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.055,"height":0.43,"depth":0.055,"radius":0.018,"segments":3},"position":[-0.23,0.64,-0.24],"rotation":[-0.04,0,-0.02]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.055,"height":0.43,"depth":0.055,"radius":0.018,"segments":3},"position":[0.23,0.64,-0.24],"rotation":[-0.04,0,0.02]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.46,"height":0.035,"depth":0.045,"radius":0.012,"segments":3},"position":[0,0.18,0.19]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.46,"height":0.035,"depth":0.045,"radius":0.012,"segments":3},"position":[0,0.18,-0.19]}]},"preview":{"projection":"perspective","azimuth":-38,"elevation":22,"fov":34,"margin":1.1}}

Or take the whole pack, which brings every entry and every material at once:

cat packs/classroom.ndjson model.ndjson > dressed.ndjson

Download classroom pack 44 KB · NDJSON ↓

The 4 finishes this pack ships

Combinations the pack author curated, rendered under one light and one camera because a comparison needs everything but the variable held still. Pick one to load it above — or mix your own with the slot controls.