Tapered ring bollard

tapered-ring-bollard dresses asset:bollard — and nothing else. Appearance is invisible to the drawing set, so adding this changes no plan, no section and no elevation.

5of 500 meshes
1finish

Drag to orbit · scroll to zoom

The build. Made here, now, by the same interpreter a model gets.

Tapered ring bollard, shown as a photorealistic visual reference — **The reference.** AI-generated, not bimtex output — the authored input this body was written against.

Paste this

This definition names only built-in materials, so it stands alone.

{"t":"lookdef","id":"tapered-ring-bollard","name":"Tapered ring bollard","for":"asset:bollard","desc":"Tapered bollard light with a glowing ring near its top.","note":"A contemporary site bollard reduced to five fabricated parts: a low foot, subtly tapered charcoal body, one stainless marker ring, a short upper collar and a soft domed cap.","body":{"type":"Group","children":[{"type":"Mesh","geometry":{"type":"CylinderGeometry","radiusTop":0.15,"radiusBottom":0.15,"height":0.055,"radialSegments":24},"material":"qsr-charcoal","position":[0,0.0275,0]},{"type":"Mesh","geometry":{"type":"CylinderGeometry","radiusTop":0.1,"radiusBottom":0.125,"height":0.72,"radialSegments":24},"material":"qsr-charcoal","position":[0,0.405,0]},{"type":"Mesh","geometry":{"type":"CylinderGeometry","radiusTop":0.105,"radiusBottom":0.105,"height":0.055,"radialSegments":24},"material":"stainless","position":[0,0.7925,0]},{"type":"Mesh","geometry":{"type":"CylinderGeometry","radiusTop":0.105,"radiusBottom":0.105,"height":0.12,"radialSegments":24},"material":"qsr-charcoal","position":[0,0.88,0]},{"type":"Mesh","geometry":{"type":"SphereGeometry","radius":0.105,"widthSegments":24,"heightSegments":12,"thetaLength":1.5708},"material":"qsr-charcoal","position":[0,0.94,0]}]}}

Or take the whole pack, which brings every entry and every material at once:

cat packs/site-assets.ndjson model.ndjson > dressed.ndjson

Download site-assets pack 60 KB · NDJSON ↓