Treatment cart
treatment-cart
dresses asset:treatment-cart
— and nothing else. Appearance is invisible to the drawing set, so adding this changes no
plan, no section and no elevation.
- 9of 500 meshes
- 2slots
- 1finish
Drag to orbit · scroll to zoom
$frame
$accent
This definition leaves
$frame and $accent
open, and a look line fills them. Every combination is one body — same
geometry, same selector, same sheets — so the block below rewrites itself as you pick.
Only materials are slottable: a size would have to agree with the plan, so it stays on
the entity.
Paste this
Every part: the 2 materialdefs the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.
{"t":"materialdef","id":"pal-steel","of":"steel","value":72}
{"t":"materialdef","id":"pal-white","of":"paint","value":92}
{"t":"lookdef","id":"treatment-cart","for":"asset:treatment-cart","desc":"Mobile clinical treatment cart with drawers and a raised tray.","slots":{"frame":"pal-white","accent":"pal-steel"},"preview":{"projection":"perspective","azimuth":38,"elevation":18,"fov":29,"margin":1.01},"body":{"type":"Group","children":[{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.72,"height":0.76,"depth":0.5,"radius":0.025,"segments":3},"position":[0,0.53,0]},{"type":"Mesh","material":"$accent","geometry":{"type":"RoundedBoxGeometry","width":0.76,"height":0.04,"depth":0.54,"radius":0.015,"segments":2},"position":[0,0.93,0]},{"type":"bimtex:Run","count":3,"from":[0,0.34,0.27],"to":[0,0.74,0.27],"children":[{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.66,"height":0.16,"depth":0.025,"radius":0.012,"segments":2}}]},{"type":"Mesh","material":"$accent","geometry":{"type":"TubeGeometry","path":[[-0.34,0.98,-0.22],[-0.34,0.98,0.22],[0.34,0.98,0.22],[0.34,0.98,-0.22],[-0.34,0.98,-0.22]],"radius":0.02,"radialSegments":10,"tubularSegments":24,"closed":true}},{"type":"bimtex:Run","count":2,"from":[-0.3,0,-0.21],"to":[0.3,0,-0.21],"children":[{"type":"Mesh","material":"$accent","geometry":{"type":"CylinderGeometry","radiusTop":0.055,"radiusBottom":0.055,"height":0.035,"radialSegments":16},"position":[0,0.055,0],"rotation":[0,0,1.5708]}]},{"type":"bimtex:Run","count":2,"from":[-0.3,0,-0.21],"to":[0.3,0,-0.21],"children":[{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.035,"height":0.12,"depth":0.06,"radius":0.012,"segments":2},"position":[0,0.12,0]}]},{"type":"bimtex:Run","count":2,"from":[-0.3,0,0.21],"to":[0.3,0,0.21],"children":[{"type":"Mesh","material":"$accent","geometry":{"type":"CylinderGeometry","radiusTop":0.055,"radiusBottom":0.055,"height":0.035,"radialSegments":16},"position":[0,0.055,0],"rotation":[0,0,1.5708]}]},{"type":"bimtex:Run","count":2,"from":[-0.3,0,0.21],"to":[0.3,0,0.21],"children":[{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.035,"height":0.12,"depth":0.06,"radius":0.012,"segments":2},"position":[0,0.12,0]}]},{"type":"bimtex:Run","count":2,"from":[0,0.45,0.278],"to":[0,0.65,0.278],"children":[{"type":"Mesh","material":"$accent","geometry":{"type":"RoundedBoxGeometry","width":0.64,"height":0.014,"depth":0.014,"radius":0.005,"segments":3},"position":[0,0,0]}]}]}}Or take the whole pack, which brings every entry and every material at once:
cat packs/clinic.ndjson model.ndjson > dressed.ndjson