bimtex

interiors

Wall hung wc 2

wall-hung-wc-2 dresses furniture:toilet — and nothing else. Appearance is invisible to the drawing set, so adding this changes no plan, no section and no elevation.

  • 4of 500 meshes
  • 2slots
  • 1finish

Drag to orbit · scroll to zoom

The build. Made here, now, by the same interpreter a model gets.
Wall hung wc 2, shown as a photorealistic visual reference
The reference. AI-generated, not bimtex output — the authored input this body was written against.
$surface
$soft

This definition leaves $surface and $soft open, and a look line fills them. Every combination is one body — same geometry, same selector, same sheets — so the block below rewrites itself as you pick. Only materials are slottable: a size would have to agree with the plan, so it stays on the entity.

Paste this

Every part: the 2 materialdefs the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.

{"t":"materialdef","id":"pack-int-linen-soft","of":"cloth","value":80,"body":{"sheenRoughness":0.55}}
{"t":"materialdef","id":"pal-ceramic","of":"ceramic","value":92}
{"t":"lookdef","id":"wall-hung-wc-2","for":"furniture:toilet","desc":"Wall-hung toilet with concealed cistern and oval bowl.","slots":{"surface":"pal-ceramic","soft":"pack-int-linen-soft"},"body":{"type":"Group","children":[{"type":"Mesh","material":"$surface","geometry":{"type":"RoundedBoxGeometry","width":0.38,"height":0.3,"depth":0.2,"radius":0.07,"segments":5},"position":[0,0.48,-0.2]},{"type":"Mesh","material":"$surface","geometry":{"type":"RoundedBoxGeometry","width":0.42,"height":0.23,"depth":0.54,"radius":0.13,"segments":5},"position":[0,0.43,0.08],"rotation":[-0.05,0,0]},{"type":"Mesh","material":"$surface","geometry":{"type":"RoundedBoxGeometry","width":0.4,"height":0.06,"depth":0.55,"radius":0.12,"segments":5},"position":[0,0.575,0.08]},{"type":"Mesh","material":"$soft","geometry":{"type":"RoundedBoxGeometry","width":0.38,"height":0.035,"depth":0.5,"radius":0.11,"segments":5},"position":[0,0.62,0.08]}]},"preview":{"projection":"perspective","azimuth":28,"elevation":18,"fov":34,"margin":1.06}}

Or take the whole pack, which brings every entry and every material at once:

cat packs/interiors.ndjson model.ndjson > dressed.ndjson
Download interiors pack 119 KB · NDJSON ↓