bimtex

interiors

Wall tv 2

wall-tv-2 dresses furniture:tv — and nothing else. Appearance is invisible to the drawing set, so adding this changes no plan, no section and no elevation.

  • 5of 500 meshes
  • 3slots
  • 1finish

Drag to orbit · scroll to zoom

The build. Made here, now, by the same interpreter a model gets.
Wall tv 2, shown as a photorealistic visual reference
The reference. AI-generated, not bimtex output — the authored input this body was written against.
$surface
$frame:frame
$frame:mount

This definition leaves $surface and $frame:frame and $frame:mount open, and a look line fills them. Every combination is one body — same geometry, same selector, same sheets — so the block below rewrites itself as you pick. Only materials are slottable: a size would have to agree with the plan, so it stays on the entity.

Paste this

Every part: the 1 materialdef the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.

{"t":"materialdef","id":"pal-charcoal","of":"paint","value":20}
{"t":"lookdef","id":"wall-tv-2","for":"furniture:tv","desc":"Thin wall-mounted television with a dark screen and slim bezel.","slots":{"surface":"pal-charcoal","frame:frame":"pal-charcoal","frame:mount":"pal-charcoal"},"body":{"type":"Group","children":[{"type":"Mesh","material":"$frame:frame","geometry":{"type":"RoundedBoxGeometry","width":1.2,"height":0.72,"depth":0.055,"radius":0.025,"segments":3},"position":[0,0.54,0]},{"type":"Mesh","material":"$surface","geometry":{"type":"RoundedBoxGeometry","width":1.13,"height":0.65,"depth":0.018,"radius":0.018,"segments":3},"position":[0,0.54,0.037]},{"type":"Mesh","material":"$frame:mount","geometry":{"type":"RoundedBoxGeometry","width":0.26,"height":0.28,"depth":0.05,"radius":0.018,"segments":3},"position":[0,0.54,-0.1]},{"type":"Mesh","material":"$frame:mount","geometry":{"type":"RoundedBoxGeometry","width":0.08,"height":0.42,"depth":0.07,"radius":0.018,"segments":3},"position":[0,0.54,-0.15]},{"type":"Mesh","material":"$frame:mount","geometry":{"type":"RoundedBoxGeometry","width":0.4,"height":0.06,"depth":0.08,"radius":0.018,"segments":3},"position":[0,0.54,-0.18]}]},"preview":{"projection":"perspective","azimuth":-28,"elevation":12,"fov":34,"margin":1.05}}

Or take the whole pack, which brings every entry and every material at once:

cat packs/interiors.ndjson model.ndjson > dressed.ndjson
Download interiors pack 119 KB · NDJSON ↓