Warm oak dining table

warm-oak-dining-table dresses furniture:dining-table — and nothing else. Appearance is invisible to the drawing set, so adding this changes no plan, no section and no elevation.

7of 500 meshes
1slot
1finish

Drag to orbit · scroll to zoom

The build. Made here, now, by the same interpreter a model gets.

Warm oak dining table, shown as a photorealistic visual reference — **The reference.** AI-generated, not bimtex output — the authored input this body was written against.

$frame

This definition leaves $frame open, and a look line fills them. Every combination is one body — same geometry, same selector, same sheets — so the block below rewrites itself as you pick. Only materials are slottable: a size would have to agree with the plan, so it stays on the entity.

Paste this

Every part: the 1 materialdef the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.

{"t":"materialdef","id":"wr-oak","of":"timber","value":58,"accent":"#9b744f","hatch":"timber","body":{"roughness":0.68}}
{"t":"lookdef","id":"warm-oak-dining-table","name":"Warm oak dining table","for":"furniture:dining-table","desc":"Quiet four-leg oak dining table with a thin softly eased top.","slots":{"frame":"wr-oak"},"body":{"type":"Group","children":[{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":1.2,"height":0.055,"depth":0.8,"radius":0.035},"position":[0,0.72,0]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":1.04,"height":0.08,"depth":0.055,"radius":0.014},"position":[0,0.665,-0.335]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":1.04,"height":0.08,"depth":0.055,"radius":0.014},"position":[0,0.665,0.335]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.06,"height":0.68,"depth":0.06,"radius":0.025},"position":[-0.5,0.34,-0.31]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.06,"height":0.68,"depth":0.06,"radius":0.025},"position":[0.5,0.34,-0.31]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.06,"height":0.68,"depth":0.06,"radius":0.025},"position":[-0.5,0.34,0.31]},{"type":"Mesh","material":"$frame","geometry":{"type":"RoundedBoxGeometry","width":0.06,"height":0.68,"depth":0.06,"radius":0.025},"position":[0.5,0.34,0.31]}]},"preview":{"projection":"perspective","azimuth":-38,"elevation":28,"fov":34,"margin":1.08}}

Or take the whole pack, which brings every entry and every material at once:

cat packs/residential-warm.ndjson model.ndjson > dressed.ndjson

Download residential-warm pack 26 KB · NDJSON ↓