bimtex

retail

Retail display table

retail-display-table dresses furniture:display-table — and nothing else. Appearance is invisible to the drawing set, so adding this changes no plan, no section and no elevation.

  • 6of 500 meshes
  • 2slots
  • 1finish

Drag to orbit · scroll to zoom

The build. Made here, now, by the same interpreter a model gets.
Retail display table, shown as a photorealistic visual reference
The reference. AI-generated, not bimtex output — the authored input this body was written against.
$surface
$frame

This definition leaves $surface and $frame open, and a look line fills them. Every combination is one body — same geometry, same selector, same sheets — so the block below rewrites itself as you pick. Only materials are slottable: a size would have to agree with the plan, so it stays on the entity.

Paste this

Every part: the 2 materialdefs the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.

{"t":"materialdef","id":"pal-charcoal","of":"paint","value":20}
{"t":"materialdef","id":"pal-oak","of":"timber","value":72}
{"t":"lookdef","id":"retail-display-table","for":"furniture:display-table","desc":"Low retail display table with a thick top and shelf.","slots":{"surface":"pal-oak","frame":"pal-charcoal"},"preview":{"projection":"perspective","azimuth":-42,"elevation":24,"fov":34,"margin":1.04},"body":{"type":"Group","children":[{"type":"Mesh","material":"$surface","geometry":{"type":"RoundedBoxGeometry","width":1.2,"height":0.055,"depth":0.8,"radius":0.018,"segments":3},"position":[0,0.7225,0]},{"type":"Mesh","material":"$surface","geometry":{"type":"RoundedBoxGeometry","width":1.13,"height":0.045,"depth":0.73,"radius":0.014,"segments":3},"position":[0,0.18,0]},{"type":"Mesh","material":"$frame","geometry":{"type":"BoxGeometry","width":0.035,"height":0.7,"depth":0.035},"position":[-0.5825,0.35,-0.3825]},{"type":"Mesh","material":"$frame","geometry":{"type":"BoxGeometry","width":0.035,"height":0.7,"depth":0.035},"position":[-0.5825,0.35,0.3825]},{"type":"Mesh","material":"$frame","geometry":{"type":"BoxGeometry","width":0.035,"height":0.7,"depth":0.035},"position":[0.5825,0.35,-0.3825]},{"type":"Mesh","material":"$frame","geometry":{"type":"BoxGeometry","width":0.035,"height":0.7,"depth":0.035},"position":[0.5825,0.35,0.3825]}]}}

Or take the whole pack, which brings every entry and every material at once:

cat packs/retail.ndjson model.ndjson > dressed.ndjson
Download retail pack 27 KB · NDJSON ↓