Wall shelving bay
wall-shelving-bay
dresses furniture:wall-bay
— and nothing else. Appearance is invisible to the drawing set, so adding this changes no
plan, no section and no elevation.
- 7of 500 meshes
- 2slots
- 1finish
Drag to orbit · scroll to zoom
$frame
$surface
This definition leaves
$frame and $surface
open, and a look line fills them. Every combination is one body — same
geometry, same selector, same sheets — so the block below rewrites itself as you pick.
Only materials are slottable: a size would have to agree with the plan, so it stays on
the entity.
Paste this
Every part: the 2 materialdefs the body resolves to, then the definition. Copying the lookdef alone still compiles and still validates — it just renders grey.
{"t":"materialdef","id":"pal-charcoal","of":"paint","value":20}
{"t":"materialdef","id":"pal-oak","of":"timber","value":72}
{"t":"lookdef","id":"wall-shelving-bay","for":"furniture:wall-bay","desc":"Wall-mounted retail shelving bay with stacked adjustable shelves.","slots":{"frame":"pal-charcoal","surface":"pal-oak"},"preview":{"projection":"perspective","azimuth":-38,"elevation":18,"fov":34,"margin":1.04},"body":{"type":"Group","children":[{"type":"Mesh","material":"$frame","geometry":{"type":"BoxGeometry","width":0.04,"height":2.2,"depth":0.04},"position":[-0.58,1.1,-0.18]},{"type":"Mesh","material":"$frame","geometry":{"type":"BoxGeometry","width":0.04,"height":2.2,"depth":0.04},"position":[0.58,1.1,-0.18]},{"type":"Mesh","material":"$surface","geometry":{"type":"RoundedBoxGeometry","width":1.2,"height":0.045,"depth":0.4,"radius":0.012,"segments":3},"position":[0,0.06,0]},{"type":"Mesh","material":"$surface","geometry":{"type":"RoundedBoxGeometry","width":1.2,"height":0.045,"depth":0.4,"radius":0.012,"segments":3},"position":[0,0.53,0]},{"type":"Mesh","material":"$surface","geometry":{"type":"RoundedBoxGeometry","width":1.2,"height":0.045,"depth":0.4,"radius":0.012,"segments":3},"position":[0,1,0]},{"type":"Mesh","material":"$surface","geometry":{"type":"RoundedBoxGeometry","width":1.2,"height":0.045,"depth":0.4,"radius":0.012,"segments":3},"position":[0,1.47,0]},{"type":"Mesh","material":"$surface","geometry":{"type":"RoundedBoxGeometry","width":1.2,"height":0.045,"depth":0.4,"radius":0.012,"segments":3},"position":[0,1.94,0]}]}}Or take the whole pack, which brings every entry and every material at once:
cat packs/retail.ndjson model.ndjson > dressed.ndjson